VST_Man 1 Posted November 8, 2004 Is it normal for a IR camera to have a "white out" ring to it? Almost as if you are looking thru a porthole. The view in the hole is night vision clear but the outter edges are snowy white and amost unviewable. Share this post Link to post Share on other sites
steve6690 0 Posted November 8, 2004 Is it a bullet camera ? I had exactly the same problem with my IR bullet. I couldn't see any dirt on the glass front but I unscrewed it anyway and polished it inside and out which cured it. Share this post Link to post Share on other sites
VST_Man 1 Posted November 8, 2004 I cleaned the outside of it but will go inside and clean also. Was reluctant due to the warranty stickers. Thanks, will let you know how it worked out. Share this post Link to post Share on other sites
CCTVINSTALLER 0 Posted November 8, 2004 What camera are you using? I remember we had a similar problem with the AVC870 series of cameras from AVTECH. If it is in the housing with seperate IRs, try move the camera as close to the glass as you can. Share this post Link to post Share on other sites
